User Interface

The medAspis Speed Scanner is an Android smart device with a very fast scanner unit. The device can be operated using a pistol grip. The medAspis Connector+ app runs on this device.

The medAspis Speed Scanner is characterised by its fast scanning speed. Depending on the device type, two different scanning technologies are available. The older models scan all 2D matrix codes that are targeted using the light spot in the centre of the illuminated window. The newer devices feature a matrix scan mode, which captures all 2D matrix codes within the illuminated rectangle simultaneously.

The user interface of the medAspis Speed Scanner

The graphical user interface is divided into various fixed sections.

The information read from the last scan is displayed in the centre, together with a timestamp. Above this, you will find the result of the check carried out by the relevant NMVS. If the system transmits the product name, it is displayed here. This product name may be truncated if it is too long to fit on a single line.

An icon indicates whether the result was positive (green tick) or negative (red cross). The Solidsoft system displays a warning using a yellow icon. Other warnings – for example, following the scanning of a barcode in the wrong format – are indicated by a blue icon. A list of all icons can be found in the appendix to this document.

There is a counter in the bottom left-hand corner. This counter counts the number of scanned packs, but ignores duplicate scans of the same pack or scans of codes that are not FMD 2D matrix codes. Tapping the number resets it to zero.

To the right of the counter is the FMD menu. This menu can be used to select the FMD operation, which is then used to send the 2D matrix codes to the relevant NMVS. The last FMD operation selected remains active until a new operation is chosen. For greater clarity, the selected FMD operation is displayed again in the top-left corner. After accessing the app settings or when an operator logs out, the active FMD operation always resets to ‘verify’.

The indicator on the far right shows whether the device is currently connected to the medAspis Lean FMD system via the internet. The device is usually ‘Online’. If the internet connection to the Lean FMD system is disrupted, this is indicated here by the word ‘Offline’. In this case, the scanned data is stored on the medAspis Speed Scanner and processed at a later stage. More on this in a separate chapter.

The three dots (⋮) on the far right next to it open the app settings.

Ordering new Aggregation Codes

Please allow up to 24 hours for your order to be processed. We will then send the newly generated Aggregation Codes as a PDF to the email address provided here.

Please enter the number of Aggregation Codes you required:

Request a Replacement Device

Is your FMD Speed Scanner no longer working? To ensure you can continue working without interruption, we will send you a replacement device as quickly as possible. At the same time, you will receive a return label for sending back your defective device.

You will receive the replacement unit regardless of whether your warranty is still valid.

Terms of service

Support for counterfeit alerts

Do you suspect counterfeiting? Our medAspis Alert Team will assist you with the process. We are also happy to assist you with unclear error messages or unfamiliar situations.

Describe the incident using the report form. If needed, you can upload up to three photos. We will contact you as soon as possible and support you with the next steps.

Please enter an alert category:
Photos of packs, the Control Panel or the display of the FMD Speed Scanner
(max. 3 photos)

Compliance Check-up: FMD under review

Companies in the pharmaceutical industry are validated and meet strict quality requirements. Nevertheless, there is still a significant compliance risk with FMD.

Suspected falsification cases may not be handled and documented in a GxP-compliant manner.

With our free, anonymous and non-binding Compliance Check-up, we analyse and assess your company’s critical FMD error messages.

Review compliance

Based on your existing FMD audit trails, we analyse among other things:

The analysis is performed entirely within your data system. No data is transmitted to medAspis. All evaluations remain anonymous.

Request Compliance Check-up

Is there a specific reason for the Compliance Check-up?

Error messages

Download the error messages directly to your computer in your local language.

Error messages

Can’t find your language? As soon as you become a customer, we’ll of course provide the error messages in your local language. Promise.

Systematic Validation

medAspis stands for proven quality and traceable processes. Lean FMD provides the necessary framework for this.

Validated and Documented

Lean FMD is validated in accordance with EU-GMP Annex 15. medAspis operates a Quality Management System in accordance with ISO 9001 and supports you with validation and the required documentation.

Validation toolkit

With the Validation Toolkit, you receive the documentation for the validation of Lean FMD. This enables you to carry out the necessary validation steps in a structured and traceable manner.

Download an excerpt from the Validation Toolkit to get a first impression of the structure and process of validation.

The complete toolkit contains all the necessary documents for validating Lean FMD.